Archive for the 'Table Saws' Category

Radial Arm Saw

Monday, May 11th, 2015




We’re glad to have you at Renovation Junky!

You can spend a small fortune making home improvements , one option to limit the costs on Table Saws is to buy on eBay. My tool box, including Table Saws were mostly bought at discount prices on eBay. So your inquiry for Table Saws ends here at Renovation Junky. We present you with the the Table Saws products below.

Radial Arm Saw for sale



« Previous12345...89

Lubrication For Your Table Saw's Blade Wheel Gears

One of woodworking's biggest bummers has to be a table saw with blade wheel and tilt gears that are so caked with sawdust that they become difficult to turn. Especially if you're a hobbyist who has been waiting all week to get into the wood shop to work on a project.

The problem that most woodworkers have stems from the use of "wet" or sticky grease that most table saw manufacturers use in the factory. They slather this grease on thick and it works beautifully for a time - until your blade wheel only turns with a hammer due to all the saw dust build up.

Some woodworkers claim that grease of this manner is never a problem, that they get years of great turning out of their blade and tilt gears lubricated just as they come from the factory. For these folks the chances are good that they are both light woodworkers - that is, they don't log many hours in the wood shop - and that they use dust collection. Which every woodworker should be doing by the way for safety purposes.

For the hobbyist with dust collection though it's still advisable to keep a close watch on those blade and tilt gears to make sure they're not gumming up too bad.

If you're having a problem with turning your gears - or want to preemptively maintain your gears with a non-sticky lubricant - you'll need to first clean off the grease and sawdust.

Read your manual first before attempting any sort of maintenance - that should always be your first guide to keeping your gears cleaned and rotating smoothly.

In addition to, or possibly following what your manual recommends you could clean off the gunk first with a rag, and then use an old toothbrush to clean off the remaining gunk and grease.

Finally - if you have it - use compressed air to really clean the gears of any remaining sawdust.

Then you've got to spend some time deciding which lubricant you're going to use.

There are a number of non-greasy, non-sticky lubricant options that tend not to attract saw dust.

Perhaps one of the most popular is simple bees wax - the kind often used for sealing toilets. Use that tooth brush and brush on a good healthy coat of wax. Paraffin wax - the kind often available at grocery stores for use in canning - is another alternative to bees wax.

Lithium grease is another popular option for lubricating your table saw gears. Lithium grease comes in two varieties - spray on and lubricant in a tube.

The spray on variety dries to a light coat and typically penetrates well and even cleans the gears a little. One issue you may find with the spray on lithium lubricant is that it doesn't leave a thick coat. This may be fine for certain applications but may not give you the ultimate in smooth turning.

The lithium grease that comes in a tube is dense like grease. Apply it liberally in a good thick coat to achieve the levels of smoothness and motion that you're used to in brand new machines.

Another popular lubricant found at most bike stores is spray-on graphite lube. It dries to a nice powder that doesn't collect dust, though doesn't give you the density of application that lithium grease does.

One expensive and highly-lubricating alternative is anti seize cpd, found in auto supply stores and used on spark plugs. This metal-added lubricant sticks in a manner similar to paint and works extremely well at high temperatures. It's more expensive but like the other lubricants mentioned does not attract dust.

Other Lubrication Points for Your Table Saw

The bed of your table saw needs regular maintenance too. Scrub it off regularly and spray it with a teflon based dry lubricant to keep the wood from binding.

Consider lubricating your saw blades as well with a Blade Lubricant Stick. The oils and waxes in the stick make your blade cut more cleanly through your projects and helps extend the life of your blade.

Bearing lubricant is another important lube to investigate for your table saw - a good, penetrating lubricant that will protect and seal the bearing's inner workings and extend the overall life of your saw.

Read Your Table Saw Manual for More Tips

As with any after-market tips or tricks you should always consult your tool manual before you start any maintenance applications. If your manual lacks appropriate information then consider contacting the manufacturer directly, or the experts at the store where you bought the saw.

And most importantly - be safe and have fun (and ALWAYS in that order...).

garrett french

View all articles by garrett french

You might love these Radial Arm Saw


RADIAL ARM SAW 16


RADIAL ARM SAW 16" MODEL 3571


$2,500.00


CRAFTSMAN PROFESSIONAL Series Radial Arm Saw with Laser Trac


CRAFTSMAN PROFESSIONAL Series Radial Arm Saw with Laser Trac


$750.00


Craftsman Radial Arm Saw


Craftsman Radial Arm Saw


$350.00


SEARS CRAFTSMAN 10


SEARS CRAFTSMAN 10" RADIAL ARM SAW 2.5hp w/EXTRAS GREAT CONDITION!


$552.00


Sears Craftsman 12


Sears Craftsman 12" commercial Radial Arm Saw 240 volt 1ph


$550.00


CRAFTSMAN 10


CRAFTSMAN 10" RADIAL ARM SAW AND CABINET


$500.00


Radial Arm Saw with LaserTrac New In Box Local Pickup Only


Radial Arm Saw with LaserTrac New In Box Local Pickup Only


$450.00


Amf Dewalt Radial Arm Saw Vintage


Amf Dewalt Radial Arm Saw Vintage


$375.00


Dewalt Radial Arm Saw Model MBF 225


Dewalt Radial Arm Saw Model MBF 225


$295.00


Rockwell Radial Arm Saw Motor 5 HP


Rockwell Radial Arm Saw Motor 5 HP


$250.00


Craftsman radial arm saw


Craftsman radial arm saw


$250.00


FREUD SUPER DADO SD508 8


FREUD SUPER DADO SD508 8"DIA 5/8"ROUND ARBOR TABLE/RADIAL ARM SAW BLADE KIT


$246.25


Craftsman 10-in Radial arm Saw


Craftsman 10-in Radial arm Saw


$225.00


Craftsman 10


Craftsman 10" Table Radial Arm Saw


$200.00


vtg Delta Rockwell radial arm saw Marathon 115/230v motor 1-1/2 hp, w/ stand USA


vtg Delta Rockwell radial arm saw Marathon 115/230v motor 1-1/2 hp, w/ stand USA


$200.00


NOS Delta Rockwell Radial Arm Saw Yoke Aluminum p/n 424041020005 for Large Saws


NOS Delta Rockwell Radial Arm Saw Yoke Aluminum p/n 424041020005 for Large Saws


$199.95


NOS Delta Rockwell 14


NOS Delta Rockwell 14" Radial Arm Saw Guide Cast Iron Pivot Bar p/n 424033550010


$199.95


Delta Rockwell Radial Arm Saw


Delta Rockwell Radial Arm Saw


$189.99


DELTA MULTIPLEX 20A RADIAL ARM SAW TRACK


DELTA MULTIPLEX 20A RADIAL ARM SAW TRACK


$179.00


Craftsman Radial Arm Saw On Base With Casters


Craftsman Radial Arm Saw On Base With Casters


$175.00


Craftsman 10


Craftsman 10" Radial Arm Saw/Table


$160.00


WARDS POWR-KRAFT 10


WARDS POWR-KRAFT 10" RADIAL ARM SAW #TPC 2610B, ALL WORKS WELL, NICE OLD SAW.


$159.99


craftsman radial arm saw


craftsman radial arm saw


$150.00


Craftsman Radial Arm Saw Complete With Safety Guard  1.5 HP developes 2.5 HP


Craftsman Radial Arm Saw Complete With Safety Guard 1.5 HP developes 2.5 HP


$150.00


Craftsman 10


Craftsman 10" Radial Arm Saw


$150.00


letchtung radial saw planer pn 24729 3 14 for shopsmith or drill press, timing belt amp; sprocket assembly for 7740 dewaltblack amp; decker radial arm saw, craftsman tool stand adjustable leveling feet table sawjointerradial armband, craftsman radial arm saw roller bearing covers width indicator cr01, yoke lock handle for ridgid rs10000 10 radial arm saw 8058741 bin b10, runout sale plumbing radial clamp crimp tool make an offer viega bpress conex , runout sale plumbing radial clamp crimp tool make an offer viega bpress conex , delta rockwell 10 radial arm saw bevel lock handle saw mod 30c, delta rockwell 10 radial arm saw yoke lock handle saw mod 30c, sears craftsman 9 radial arm saw manual no11329340, radial arm saw part, omga radial arm saw motor yoke, vintage craftsman sears 10inch radial saw 11323100 , sears craftsman radial arm saw parts shaft nut and 2 collars, sears craftsman radial arm saw parts miter lock knob, vintage book craftsman radial arm saws wood plastic and metalworking

Delta Table Saw

Friday, March 6th, 2015

Fatal error: Cannot redeclare class Spinner in /home4/dillon/public_html/renovationjunky.com/thinspin.php on line 3